SpaceX’s first orbital-class Starship and Super Heavy to return to launch pad next week

CEO Elon Musk says that SpaceX could return the first orbital-class Starship prototype and its Super Heavy booster to the launch site after rolling the rockets back to the factory for finishing steps.

In response to a video of Super Heavy Booster 4 (B4) returning to the build site, Musk rather specifically stated that both Booster for and Starship 20 (S20) will return to the orbital launch pad on Monday, August 16th. SpaceX returned Ship 20 to its ‘high bay’ vertical integration facility mere hours after the Starship was stacked atop a Super Heavy booster (B4) for the first time ever on August 6th. For unknown reasons, perhaps due to high winds, Booster 4 spent another five days at the pad before SpaceX finally lifted it off the orbital launch mount and rolled it back to the high bay, where it took Ship 20’s place on August 11th.

Almost immediately after S20’s August 6th return, its six Raptor engines were removed to make way for an engine-less proof test campaign that Musk has now implied could start as early as next Monday. Mirroring S20, SpaceX also begin uninstalling Super Heavy Booster 4’s 29 Raptor engines the same day it returned to the high bay.

Booster & Ship will return to orbital launch pad on Monday (winds allowing). Just finishing off some small plumbing & wiring, which is easier in high bay.

— Elon Musk (@elonmusk) August 12, 2021

Around 12 hours after the process began, SpaceX appeared to have removed 14 (just shy of half) of Super Heavy B4’s Raptor engines – a pace almost as spectacular as their 12-18 hour installation a bit less than two weeks prior. Aside from making engine removal dramatically easier, Musk says that SpaceX moved Ship 20 and Booster 4 back to the build site to expedite some minor final integration work – namely “small plumbing and wiring.”

Third Raptor has been removed from Booster 4!! #B4 #starship #starbase

— Austin DeSisto (@AustinDeSisto) August 12, 2021

Raptor 14/29 is RB8!

Keep ‘em coming SpaceX!

— Nic Ansuini (@NicAnsuini) August 12, 2021

However, aside from Raptor removal, the most obvious and significant work ongoing since the pair’s return to the high bay is the process of inspecting Starship S20’s heat shield and repairing or replacing broken, chipped, and loose tiles. Not long after Ship 20 arrived back at the build site, workers in boom lifts began a seemingly arduous process of inspecting the Starship’s nose heat shield and marking – with colored tape – hundreds of tiles with cracks, chips, or other less visible issues.

After several days of inspections and hundreds of tiles marked, SpaceX finally began the process of removing off-nominal tiles early on August 12th. According to, that removal process is not particularly easy and can require the use of power tools to effectively cut tiles off their embedded mounting frames. Given the amount of force required, some level of care is also almost certainly needed to avoid damaging any adjacent tiles, which could quickly cause a minor misstep to exponentially spread. Nevertheless, a small team of SpaceX technicians seemingly managed to remove no less than several dozen (and maybe 100+) broken tiles in a few hours.

So we’re taking an interest in the color-coding on Ship 20’s TPS via Starbase Live and Philip’s photos below. Shuttle vibes, but I’m sure Starship has its own coding system. Shuttle had a variety of TPS types and “fun” with gap fillers etc.

Shuttle examples from our L2 vault.

— Chris Bergin – NSF (@NASASpaceflight) August 8, 2021

Starship S20, August 10th. (NASASpaceflight – bocachicagal)

Up next, those removed tiles will need to be replaced. Still, it remains to be seen if SpaceX will choose to fully complete Starship S20’s “98% done” heat shield before sending the ship back to the launch site for proof and static fire testing. To a degree, putting Starship through a gauntlet of ground tests with a full heat shield installed would be an excellent test of the resilience of its thermal protection system to major thermal stresses from frosty steel skin and expansion/contraction during fueling, as well as violent vibrations during static fires.

However, Starship S20’s heat shield is already so close to completion that it might be only marginally less valuable to save time by testing the vehicle as soon as possible.

4 significant items:

– Final heat shield tiles for ship
– Thermal protection of booster engines
– Ground propellant storage tanks
– QD arm for ship

2 weeks.

— Elon Musk (@elonmusk) August 6, 2021

Booster 4 drives by Ship 20 to take its place in the high bay. (NASASpaceflight – bocachicagal)

To an extent, Booster 4 is a much simpler case as Super Heavy needs to major thermal protection. However, according to Musk, some or all of Super Heavy’s 29 Raptor engines will need their own miniature thermal protection system – perhaps a flexible blanket-like enclosure not unlike what SpaceX uses to partially protect Falcon booster engines during reentry. It remains to be seen if Booster 4 will return to the launch site without engines for cryogenic proof testing or if SpaceX will install heat shielded Raptors before starting the first flightworthy Super Heavy’s first test campaign.

The post SpaceX’s first orbital-class Starship and Super Heavy to return to launch pad next week appeared first on TESLARATI.

Read More

Leave a Comment

Your email address will not be published. Required fields are marked *